What is ArCADia-reinforced concrete slab?
ARCADIA-REINFORCED CONCRETE SLAB is a sector-specific module of the ArCADia BIM system, based on the Ideology of Building Information Modeling (BIM). Is a sector-specific module of the ArCADia BIM system, based on the Building Information Modeling (BIM) ideology.
The program is intended for construction engineers. The purpose of the application is to provide maximum user support in developing detailed structural drawings of reinforced concrete boards in a CAD program.
ARCADIA-REINFORCED CONCRETE SLAB
A structural software, which creates a spatial model of reinforcement of the slab, allows a later edition and, for example, the automatic creation of new cross sections of slab, based on the data entered by the user, in the form. Views of the upper and lower reinforcement plates of the slab and the cross sections of the element. The molding of the slab reinforcement plate in the program is possible on the basis of the guidelines specified in the standard PN-EN 1992-1-1 Eurocode 2: September 2008.
The ARCADIA-REINFORCED CONCRETE SLAB program includes the following features and capabilities:
- Ability to design multiple cards within a single document.
- Ability to transfer ceilings, including their conditions to support the model of the building in the program.
- Ability to build the geometry and reinforcement plate of the slab in two main views defined separately for the top and bottom reinforcement plates, as well as any number of sections of assumed plates.
- Full control of the visibility of the drawing and printing of visualizations and cross sections and their components, as well as the ability to switch between them when working on the model.
- Free navigation and addition of new cross sections of plates, in addition to defining the depth of the cross-section reinforcement field.
Ability to shape:
- Ability to freely shape the contours of the slab and its supports in the form of walls, columns and joints, as well as the introduction of openings of any shape in the projected slab.
- Automatic inclusion of rectangular reinforcing grids for any given shape of the slab or its fragment with the maintenance of a uniform or altered grid reinforcement in both directions, as well as the maintenance of the
- (top and bottom cover) and the side cover for all grid bars.
- Automatic inclusion of rectangular reinforcement grids for the user-defined area within the rectangular shape slab or any other shape.
Rectangular reinforcement:
- Ability to copy networks defined within the scope of the top and bottom reinforcement, as well as between those surfaces.
- Ability to fold the bars from the top grid to the bottom grid.
- Ability to introduce regular reinforcement densities in both directions in the selected area of the given grid and make a copy.
- Ability to insert a cut in any way into the predetermined grid, regardless of the opening in the slab.
- Ability to modify grid contours and the direction of the main and secondary bars in the grid, as well as the ability to remove the grid on single bars (any compression in the grid is removed along with the disabled grid).
- Ability to add single bars to the grid in the main or secondary direction.
- ... And more!
- Ability to copy grid bars (constituting non-removable bars after grid modification).
- Ability to modify the length of simple grid bars (until the grid is rebuilt).
- Ability to move the entire distribution of the bars in the grid with maintenance after rebuilding the grid (without removing the grid).
- Automatic removal of the distribution of excessive grid bars based entirely on the slab support area (walls and joints).
- Ability to establish vertical punches in direct slab support areas in columns.
- Automatic inclusion in the reinforcing steel list of the regular distribution of the support tables of the top grid.
Backup:
- Sizing the reinforcement in millimeters or centimeters with the ability to adjust accuracy.
- Automatic inclusion of the necessary bending radii of the reinforcing bar.
- Ability to create reinforcement bars anyway.
- Ability to modify the diameters and properties of reinforcing bars.
- Automatic ejection of reinforcing bars, including their sizing and description (details of the reinforcing bars).
- Ability to enter an aggregate numbering of the reinforcement bars of the slab and their descriptions for bars with a regular increase in the length of the bar, which limits the amount of bar numbers in the slab.
- Automatic continuous numbering of all bars within a document or for a slab.
- Ability to freely shape sizing of slab geometry.
- Automatic creation and modification of the reinforcing steel list based on the reinforcement model created (list for a single slab or list for the entire drawing).
- Visualization of created slab reinforcement model in a 3D view.
Systems requirement:
To function, all industry-specific modules need a license to:
ArCADia LT or ArCADia 10 or ArCADia PLUS 10 or AutoCAD 2013/2014/2015.
If an industry-specific module is installed as an overlay for AutoCAD, the ARCADia AC module is required.
ArCADia REINFORCED CONCRETE SLAB system requirements:
Pentium-class computer (Intel Core i5 recommended)
2 GB minimum RAM (8 GB recommended)
About 3 GB of free hard disk space for installation
A DirectX 9.0 compatible graphics card (a 1GB RAM card is recommended)
SO: Windows 10 PL or Windows 8 PL or Windows 7 PL
